Is the choice of a centrifugal pump or a volumetric pump in a pharmaceutical laboratory?
Performance:
In order to be able to select the type of pump that is suitable in the pharmaceutical laboratory, it is necessary to have a deep understanding of its performance and understand the difference in its specific working principle. To this end, we must understand that the centrifugal pump is dependent on the pressure (or The variable flow phenomenon of the indenter, while the positive displacement pump has a more or less constant flow phenomenon independent of the pressure.
Viscosity:
The centrifugal pump and the positive displacement pump are also different in viscosity, and the flow rate drops when the viscosity rises, and the positive displacement pump actually causes an increase in the flow rate. This is because the higher viscosity liquid fills the voids in the volumetric pump, resulting in higher volumetric efficiency.
Efficiency:
In pharmaceutical laboratories, it is necessary to consider the effect of pressure on the equipment. After all, different pumps have different characteristics. Different efficiencies will increase the pressure of the pump. For volumetric pumps, as the pressure increases, Efficiency will actually increase, and centrifugal pumps have a better efficiency point. On both sides of this point, the overall pump efficiency will drop significantly.
Entrance conditions:
The pharmaceutical laboratory has different conditions for the inlets of these two types of pumps. The centrifugal pump needs to reserve a certain amount of liquid in the pump to form a pressure difference. The liquid-free dry pump cannot be started by itself, due to the volume. The pump agitates the liquid by the expansion and contraction of the liquid volume, and the negative pressure is formed at the inlet, so the volumetric pump can initiate the perfusion. In some cases, this is the decision whether to choose the volumetric pump or the centrifugal pump. Elements.
The selection of different pumps in the pharmaceutical laboratory is to be selected according to their own needs. It takes a lot of time to get the right choice to get a higher benefit.
Recomendações relacionadas
-
Como lidar com o congelamento do frigorífico?
1932Existem muitos tipos de chillers, e os clientes familiarizados com esta peça estão definitivamente familiarizados com o chiller. Para a cobertura do refrigerador, muitas pessoas são ignorantes, e então vamos aprender mais sobre isso com LNEYA! 1. Se é um refrigerador, por favor...
Ver detalhes -
Em que instrumentos pode ser utilizado o refrigerador de recirculação para laboratório LNEYA?
1350Os chillers de recirculação de laboratório têm uma vasta gama de aplicações na investigação científica e na produção industrial, proporcionando um controlo preciso da temperatura para várias experiências e instrumentos. Seguem-se alguns cenários comuns e...
Ver detalhes -
Como limpar o sistema de controlo do ar?
1900In order to respond to the requirements of the two types of society in the country, environmental protection and conservation have become increasingly important. Therefore, in order to extend the life of the product, it is still necessary to have ...
Ver detalhes -
The Role of Chemical Refrigeration Temperature Control Unit
1655In pharmaceutical and chemical plants, the raw materials inside the reactors involved in industrial production require rapid cooling and cooling. In order to achieve this goal, the reactor undergoes direct refrigeration and cooling, thereby indi...
Ver detalhes
LNEYA Refrigeradores industriais Fabricante Fornecedor










