Refrigeration Principle Of Low Temperature Chiller
The refrigeration principle of the so-called refrigerador de baixa temperatura is to use the artificial method, compressor refrigeration, through energy consumption, in a cycle process, in the process that cooling materials take away the heat. Generally speaking, the compressor is use to refrigerate. With the refrigerant, the low boiling point material is used as the medium. The refrigerant is compressed in the compressor, the saturation temperature is higher than the ambient temperature, then it passed through the condenser and is condensed into liquid, liquefied through the throttle valve, and then the heat is absorbed by the cold medium to become the low pressure steam, finally it returns to the compressor cycle.
In addition to compressor refrigeration, there is ammonia refrigeration. However, the overall cost of compressor refrigeration is lower than that of ammonia refrigeration. So now, we tend to choose compressor refrigeration.
After understanding the principle of refrigeration, the selection of a series of equipment parameters such as water flow, outlet temperature and cooling capacity of low temperature chiller should be fully understood in order to make a better selection.
Of course, the refrigerants of low temperature chillers can be environmental refrigerants as far as possible, for the sake of more energy saving and environmental protection and in line with the demand of the public.
Recomendações relacionadas
-
Temperature control during new energy vehicle battery test
1129With the continuous implementation of energy saving and emission reduction policies, new energy power batteries are also continuously encouraged to develop, and liquid cooling systems have become an inevitable trend for new energy vehicles. The or...
Ver pormenores -
Descrição da investigação do dispositivo de controlo da temperatura do circuito integrado
967Atualmente, o controlo da temperatura do circuito integrado é utilizado nas indústrias de circuitos integrados, semicondutores e pastilhas. Assim, para as necessidades de ensaio dessas indústrias, é necessário o controlo da temperatura do circuito integrado. Atualmente, existem...
Ver pormenores -
Immersion phase change liquid cooling system
1121What is immersion phase change liquid cooling system?
Ver pormenores -
The difference between a large refrigeration and heating circulator and a test chamber
8971. For the high temperature test under special circumstances, the high and low temperature test chamber may not meet the requirements. Generally speaking, the high temperature upper limit of the high and low temperature test box is 200 ℃, and its ...
Ver pormenores