LNEYA ultra-low temperature cold box power supply+electronic control instrument system description
LNEYA ultra-low temperature cold box needs to be tested after a long time of use. What should be paid attention to when the power supply and electronic control instrument system are inspecting?
LNEYA ultra-low temperature cold box power supply and electronic control instrument system inspection, before power-on should check whether the distribution capacity and unit power are consistent, whether the selected cable diameter can withstand the host operating current. Check whether the electrical system is consistent with the unit. The unit is electrically: three-phase five-wire system (three phase lines, one neutral line, one ground line, 380V ± 10%). Check if the power supply line of the compressor is connected tightly. If it is loose, retighten it. The torque at the compressor wiring is 500kg/cm. Due to factors such as long-distance transportation and lifting, the screws may be loose. Failure to do so may result in damage to electrical components (such as air switches, AC contactors, etc.) and compressors in the main control cabinet.
Use a multimeter to carefully inspect all electrical circuits of the LNEYA ultra-low temperature cold box, check that the wiring is properly installed in place; use megaohm measurement to make sure there is no short circuit in the case; check that the ground wire is properly installed in place, and the insulation resistance to ground is greater than 2MΩ; check if the power cable is Meet the capacity requirements. Check if the disconnect switch is installed on the power supply line of the supply unit. All the wiring of the main circuit in the control cabinet and the external wiring of the control circuit can be energized after comprehensive inspection (such as crankcase oil heater, compressor electronic protector, circulating water temperature sensor, target flow switch wiring, pump connection) Control, etc.); Check if the terminal bolts are tightened and there is no looseness.
The performance of the power supply and the electronic control instrument are more important in the operation of the LNEYA ultra-low temperature cold box, so it is necessary to check the recommendations regularly.

Recomendações relacionadas
-
Que tipo de sistema de controlo de temperatura é necessário para a preparação de esfregaços na indústria farmacêutica?
860Na indústria farmacêutica, a secagem por pressão negativa e a preparação de esfregaços têm requisitos específicos para o controlo da temperatura e, normalmente, requerem dispositivos de controlo da temperatura precisos e ajustáveis para garantir a qualidade do produto e a estabilidade do processo...
Ver pormenores -
Método de arrefecimento para instrumentos evaporativos de laboratório em funcionamento
907A escolha do método de arrefecimento correto para uma experiência de evaporação pode ter um impacto inimaginável no desempenho geral do sistema, na economia e na eficiência. É necessário adquirir uma máquina de circulação de água de arrefecimento como equipamento de apoio. Quando pu...
Ver pormenores -
Talk about the main points of choice for circulating water chiller in laboratory
932Circulating water cooler is also called chiller. It is a kind of cooling water equipment that can provide constant temperature, constant flow and constant pressure. Currently there are many kinds of chillers in the market. How to buy a suitable ch...
Ver pormenores -
Como resolver a avaria do controlador de pressão do frigorífico de temperatura ultra baixa?
1242Se o frigorífico industrial de temperatura ultrabaixa encontrar uma falha relacionada com o controlador durante o funcionamento, se não for resolvida a tempo, o controlador de pressão pode ficar indisponível. O controlador de pressão desempenha um papel muito importante no funcionamento do frigorífico...
Ver pormenores