Pesquisar toda a estação


Centro de notícias

Descrição pormenorizada da reparação geral de válvulas de máquinas integradas de alta e baixa temperatura

A válvula de máquina integrada convencional de alta e baixa temperatura substitui o empanque, e a principal função do empanque é impedir que o meio de trabalho vaze ao longo da direção axial da haste da válvula. No caso de uma pequena fuga, o empanque pode ser apertado. Se a fuga não puder ser eliminada, o empanque deve ser substituído. Aquando da substituição, a haste da válvula deve ser aparafusada até ao fim. Utilize a agulha de enchimento para retirar o empanque antigo e, em seguida, enrosque o novo empanque preparado...

In conventional high and low temperature integrated machine engineering, the valve core of a large diameter valve is sealed by a layer of babbitt or fluoroplastic. The back of the spool also has a layer of babbitt so that when the stem is rotated out of position, the working fluid can be sealed without leaking outward along the stem. After the valve is disassembled, first straighten the stem to deburr, then replace the valve’s babbitt alloy. At the same time, the valve seat should also be ground to make the valve core and the valve seat tight. For small cast steel or brass valve spools, the seal of this valve is obtained by a line of metal contact, hence the line seal. Because it is a wire seal, the valve seat and the valve core should be carefully ground to obtain a satisfactory sealing effect. After the valve is overhauled, the air tightness test shall be carried out in accordance with the relevant requirements.

The repair of the safety valve in the explosion-proof high-temperature integrated machine refrigeration system is also roughly the same as above, but since the babbitt alloy is soft, it is often difficult to return to the original position after the safety valve is operated once due to overpressure, so when the pressure is reduced to the closing pressure At the time, it is still not tight. In order to overcome this drawback, some products have changed the Babbitt alloy to a nickel-chromium-titanium (harder) alloy, or replaced with polytetrafluoroethylene.

The timely maintenance of conventional high and low temperature integrated machine valves can better help the operation of conventional high and low temperature integrated machines, so it is recommended to solve them in time.

O anterior: O próximo:

Recomendações relacionadas